張世航
姓名 張世航
聯絡電話 +886-3-931-7504
電子郵件 shchang@niu.edu.tw
類別 專任教師
職稱 教授
授課領域 形狀記憶合金/高制振能材料/非晶質材料/鎂合金
研究專長 複合及功能性材料、生醫材料
年度 論文名稱
2015 S.H. Chang*, W.C. Chiu, Selective leaching and surface properties of Ti50Ni50-xCux (x = 0 – 20 at.%) shape memory alloys for biomedical applications, Applied Surface Science 324 (2015) 106-113.
2015 S.H. Chang*, B.Y. Chen, C.H. Chiang, Toxicity assessment of Fe-Mn-Al ternary alloys using a Probit dose-response model and an augmented simplex design, Materials Transactions 56 (2015) 135-139.
2015 C. Chien, S.K. Wu, S.H. Chang, Damping capacities of Ti50Ni50-xCux shape memory alloys measured under temperature, strain, and frequency sweeps, Materials Transactions 56 (2015) 193-199.
2015 S.H. Chang*, S.H. Hsiao, Effects of texture on the damping characteristics of cold-rolled and annealed Ti50Ni40Cu10 shape memory alloy, Metalurgija, 55 (2016) 33-36.
2015 S.H. Chang*, B.Y. Chen, J.X. Lin, Toxicity assessment and selective leaching characteristics of Cu-Al-Ni shape memory alloys in biomaterials applications, Journal of Applied Biomaterials & Functional Materials, In Press.
2014 S.H. Chang*, J.Z. Chen, S.H. Hsiao, G.W. Lin, Nanohardness, corrosion and protein adsorption properties of CuAlO2 films deposited on 316L stainless steel for biomedical applications, Applied Surface Science 289 (2014) 455-461.
2014 S.H. Chang*, S.H. Hsiao, Inherent internal friction of Ti50Ni50-xCux shape memory alloys measured under isothermal conditions, Journal of Alloys and Compounds 586 (2014) 69-73.
2014 I.C. Cheng, S.H. Chang*, G.W. Lin, C.T. Chi, S.H. Hsiao, J.Z. Chen, Effect of Al/Cu ratios on the optical, electrical, and electrochemical properties of Cu-Al-Ca-O thin films, Journal of Alloys and Compounds 609 (2014) 111-115.
2014 C. Chien, S.K. Wu, S.H. Chang, Damping characteristics of Ti50Ni50-xCux (x=0~30 at.%) shape memory alloys at low frequency, Materials 7 (2014) 4574-4586.
2014 P.L. Ko, F.L. Chang, C.H. Li, J.Z. Chen, I.C. Cheng, Y.C. Tung, S.H. Chang, P.C. Lin, Dynamically programmable surface micro-wrinkles on PDMS-SMA composite, Smart Materials and Structures 23 (2014) 115007.
2013 S.K. Wu, S.H. Chang*, C. Chien, Effect of cold-rolling on damping characteristics of multi-component Al-12%Si alloy measured by dynamic mechanical analyzer, Materials Transactions 54 (2013) 738-744.
2013 S.H. Chang*, C.H. Chian, Plasma surface modification effects on biodegradability and protein adsorption properties of chitosan films, Applied Surface Science 282 (2013) 735-740.
2013 S.H. Chang, S.K. Wu, Damping characteristics of as-spun and annealed Ti51Ni49 ribbons measured by dynamic mechanical analysis, Journal of Alloys and Compounds 577S (2013) S175-S178.
2013 S.H. Chang, S.K. Wu, Determining transformation temperatures of equiatomic TiNi shape memory alloy by dynamic mechanical analysis test, Journal of Alloys and Compounds 577S (2013) S241-S244.
2012 S.H. Chang, S.K. Wu, Y.H. Li, K.C. Lin, H.Y. Bor, Damping properties of homogenized and cold-rolled Mg-14.3Li-0.8Zn β-phase magnesium alloy, Materials Transactions 53 (2012) 407-411.
2012 S.H. Chang*, B.Y. Chen, Y.C. Lin, Toxicity assessment of three-component Fe-Cr-Ni biomedical materials using an augmented simplex design, Materials Science and Engineering C 32 (2012) 1893-1896.
2012 S.H. Chang*, J.J. Huang, Biodegradability and anticoagulant properties of chitosan and sulfonated chitosan films coated on TiNi alloys, Surface & Coatings Technology 206 (2012) 4959-4963.
2012 S.H. Chang*, S.K. Wu, Characteristics of TiNi shape memory foils manufactured by double cathodes electrochemical polishing, Journal of Materials Engineering and Performance 21 (2012) 2670-2674.
2011 S.H. Chang*, Low frequency damping properties of a NiMnTi shape memory alloy, Materials Letter 65 (2011) 134-136.
2011 S.H. Chang*, Influence of chemical composition on the damping characteristics of Cu-Al-Ni shape memory alloys, Materials Chemistry and Physics 125 (2011) 358-363.
2011 S.H. Chang, S.K. Wu, Low frequency damping properties of eutectic Sn-Bi and In-Sn solders, Scripta Materialia 64 (2011) 757-760.
2011 S.H. Chang*, J.L. Han, C.Y. Lee, G.L. Liu, Internal friction of TiNi shape memory alloy wires/epoxy composites measured by dynamic mechanical analysis, Polymers & Polymer Composites 19 (2011) 247-250.
2011 K.H. Chang, S.K. Wu, S.H. Chang, Crystallization temperature and activation energy of as-spun Ti52.0Ni38.5Cu9.5 ribbon, Thin Solid Films 519 (2011) 5302-5306.
2011 S.K. Wu, S.H. Chang, W.L. Tsai, H.Y. Bor, Low-frequency damping properties of as-extruded Mg-11.2Li-0.95Al-0.43Zn magnesium alloy, Materials Science and Engineering A 528 (2011) 6020-6025.
2011 S.H. Chang*, C.Y. Lee, Damping characteristics of TiNi shape memory alloy wires reinforced epoxy resin, Journal of Reinforced Plastics and Composites 30 (2011) 1931-1938.
2010 S.H. Chang*, Internal friction of Cu-13.5A-4Ni shape memory alloy measured by dynamic mechanical analysis under isothermal conditions, Materials Letters 64 (2010) 93-95.
2010 S.H. Chang, T.H. Chen, S.K. Wu, K.N. Lin, Damping characteristics of the Ti-rich TiNi melt-spun ribbon measured by using a dynamic mechanical analyzer, Physica Scripta T139 (2010) 014012.
2010 S.H. Chang, S.K. Wu, L.M. Wu, Shape memory characteristics of as-spun and annealed Ti51Ni49 crystalline ribbons, Intermetallics 18 (2010) 965-971.
2010 L.M. Wu, S.H. Chang, S.K. Wu, Precipitate-induced R-phase in martensitic transformation of as-spun and annealed Ti51Ni49 ribbons, Journal of Alloys and Compounds 505 (2010) 76-80.
2010 S.H. Chang, S.K. Wu, Damping characteristics of Sn-3Ag-0.5Cu and Sn-37Pb solders studied by dynamic mechanical analyzer, Scripta Materialia 63 (2010) 957-960.
2009 S. H. Chang, S. K. Wu, W. L. Tsai, J. Y. Wang, Cold-rolling effect on damping capacity of high-temperature damping background for AZ80 magnesium alloy, Journal of Alloys and Compounds 487 (2009) 142-145.
2008 S.H. Chang, S.K. Wu, Isothermal effect on internal friction of Ti50Ni50 alloy measured by step cooling method in dynamic mechanical analyzer, Journal of Alloys and Compounds 459 (2008) 155-159.
2008 S.H. Chang, S.K. Wu, H. Kimura, Martensitic transformation of annealed Ti50Ni25Cu25 melt-spun ribbons, Materials Science and Engineering A 476 (2008) 316-321.
2008 S.H. Chang, S.K. Wu, Effect of cooling rate on transformation temperature measurements of Ti50Ni50 alloy by differential scanning calorimetry and dynamic mechanical analyzer, Materials Characterization 59 (2008) 987-990.
2008 S.K. Wu, S.H. Chang, T.Y. Chou, S. Tong, Low frequency damping properties of dual-phase Mg-xLi-0.5Zn alloys, Journal of Alloys and Compounds 465 (2008) 210-215.
2008 S.H. Chang, S.K. Wu, Low-frequency damping properties of near-stoichiometric Ni2MnGa shape memory alloys under isothermal conditions, Scripta Materialia 59 (2008) 1039-1042.
2007 S.H. Chang, S.K. Wu, H. Kimura, Annealing effects on the crystallization and shape memory effect of Ti50Ni25Cu25 melt-spun ribbons, Intermetallics 15 (2007) 233-240.
2007 S.H. Chang, S.K. Wu, Internal friction of B2→B19’ martensitic transformation of Ti50Ni50 shape memory alloy under isothermal conditions, Materials Science and Engineering A 454-455 (2007) 379-383.
2007 S.H. Chang, S.K. Wu, Internal friction of R-phase and B19’ martensite in equiatomic TiNi shape memory alloy under isothermal conditions, Journal of Alloys and Compounds 437 (2007) 120-126.
2007 S.H. Chang, S.K. Wu, Inherent internal friction of Ti51Ni39Cu10 shape memory alloy, Materials Transactions 48 (2007) 2143-2147.
2006 S. H. Chang, S. K. Wu, Damping characteristics of cold-rolled and annealed equiatomic TiNi shape memory alloy, Key Engineering Materials 319 (2006) 9-15.
2006 S.H. Chang, S.K. Wu, Inherent internal friction of B2→R and R→B19’ martensitic transformations in equiatomic TiNi shape memory alloy, Scripta Materialia 55 (2006) 311-314.
2006 S.H. Chang, S.K. Wu, Crystallization kinetics of Ti50Ni25Cu25 melt-spun amorphous ribbons, Materials Transactions 47 (2006) 2489-2492.
2006 S.H. Chang, S.K. Wu, G.H. Chang, Transformation sequence in severely cold-rolled and annealed Ti50Ni50 alloy, Materials Science and Engineering A 438-440 (2006) 509-512.
2005 S.H. Chang, S.K. Wu, G.H. Chang, Grain size effect on multiple-stage transformations of a cold-rolled and annealed equiatomic TiNi alloy, Scripta Materialia 52 (2005) 1341-1346.
2004 S.H. Chang, S.K. Wu, Textures in cold-rolled and annealed Ti50Ni50 shape memory alloy, Scripta Materialia 50 (2004) 937-941.
年度 論文名稱
2014 C. Chien, S.K. Wu, S.H. Chang, 2014.6, “Damping Characteristics of Ti50Ni50-xCux (x=0~30 at.%) Shape Memory Alloys at Low Frequency”, Int’l Union of Mater. Res. Soc.-Int’l Conf. on Electronic Mater., 2014 (IUMRS-ICEM 2014), Taipei, Taiwan.,
2014 S.H. Chang, W.C. Chiu, S.H. Hsiao, Y.T. Kuan, 2014.7, “Plasma surface modification of chitosan/hexamethyldisilazane films for biomedical applications”, presented in the 7th International Conference on Technological Advances of Thin Films & Surface Coatings (Thinfilms 2014), Chongqing, China.,
2014 S.H. Chang, J.Z. Chen, S.H. Hsiao, G.W. Lin, W.C. Chiu, M.H. Hsieh, 2014.7, “Electrochemical properties of Cu-Al-Ca-O thin films with different Al/Cu ratio deposited on 316L stainless steel”, presented in the 7th International Conference on Technological Advances of Thin Films & Surface Coatings (Thinfilms 2014), Chongqing, China. (MOST 103-2922-U-197-010),
2014 S.H. Chang, S.K. Wu, B.Y. Chen, J.X. Lin, C.H. Chen, 2014.7, “Toxicity assessment and selectively leaching properties of Cu-Al-Ni shape memory alloys”, presented in International Conference on Martensitic Transformation (ICOMAT 2014), Bilbao, Spain.,
2014 C. Chien, S.K. Wu, S.H. Chang, 2014.7, “Damping properties of Ti50Ni50-xCux (x=0~30 at.%) shape memory alloys”, presented in International Conference on Martensitic Transformation (ICOMAT 2014), Bilbao, Spain.,
2014 C.H. Chen, S.K. Wu, S.H. Chang, 2014.7, “Martensitic transformation and shape memory effect in Ti50.6Ni39.4Cu9.8Si0.2 melt-spun ribbons”, presented in International Conference on Martensitic Transformation (ICOMAT 2014), Bilbao, Spain.,
2013 張世航,林鈞詳,邱偉誠,蕭受惠,2013.10, “鈦鎳線材金屬離子腐蝕浸出之研究”, 中國材料科學學會2013年年會論文集,桃園。,
2013 張世航,林鈞詳,邱偉誠,蕭受惠,2013.10, “銅鋁鎳形狀記憶合金之毒性分析”, 中國材料科學學會2013年年會論文集,桃園。,
2013 S.H. Chang, C.H. Chiang, J.X. Lin, S.K. Wu, 2013.5, “Toxicity of metal ions selectively leached from TiNi shape memory alloys determined by Escherichia coli DH5α”, presented in International Conference on Shape Memory and Superelastic Technologies (SMST 2013), Prague, Czech Republic.,
2013 C.H. Chen, S.Y. Chen, S.K. Wu, S.H. Chang, 2013.5, “Nanoindentation studies on precipitation hardening of Ti-rich TiNi shape memory ribbons”, presented in International Conference on Shape Memory and Superelastic Technologies (SMST 2013), Prague, Czech Republic.,
2012 張世航,江金河,林鈞詳,2012.11, “幾丁聚醣薄膜經電漿表面改質之研究”, 中國材料科學學會2012年年會論文集,雲林。,
2011 黃嘉駿,陳博彥,劉采寧,張世航,2011.6, ”微生物降解幾丁聚醣及磺酸化幾丁聚醣之研究”, 第16屆生化工程研討會,台北。,
2011 S.H. Chang, Y.C. Lin, J.J. Huang, 2011.7, “Toxicity assessment of three-component Fe-Cr-Ni biomedical materials by augmented simplex design”, presented in International Forum on Functional Materials (IFFM 2011) & the 2nd Special Symposium on Advances in Functional Materials (AFM-2), Jeju, Korea. ,
2011 S.H. Chang, J.J. Huang, Y.C. Lin, 2011.7, “Biodegradation of chitosan and sulfonated chitosan surface modification films measured by CO2 respirometer”, presented in International Forum on Functional Materials (IFFM 2011) & the 2nd Special Symposium on Advances in Functional Materials (AFM-2), Jeju, Korea. ,
2011 S.H. Chang, J.J. Huang, Y.C. Lin, 2011.7, “Thermal degradation and anticoagulant properties of natural and sulfonated chitosan deposited on nickel-titanium shape memory alloys”, presented in International Forum on Functional Materials (IFFM 2011) & the 2nd Special Symposium on Advances in Functional Materials (AFM-2), Jeju, Korea. ,
2011 S.H. Chang, S.K. Wu, 2011.9, “Determining transformation temperatures of equiatomic TiNi shape memory alloy by dynamic mechanical analysis test”, presented in International Conference on Martensitic Transformation (ICOMAT 2011), Osaka, Japan.,
2011 S.H. Chang, S.K. Wu, 2011.9, “Damping characteristics of as-spun and annealed Ti51Ni49 ribbons measured by dynamic mechanical analysis”, presented in International Conference on Martensitic Transformation (ICOMAT 2011), Osaka, Japan.,
2011 S.H. Chang, S.K. Wu, 2011.9, “The strain variation associated with martensitic transformation of shape memory alloys tested by dynamic mechanical analysis”, presented in International Union of Materials Research Societies-International Conference in Asia (IUMRS-ICA 2011), Taipei, Taiwan.,
2011 S.H. Chang, Y.C. Lin, C.H. Chiang, J.J. Huang, 2011.9, “Toxicity assessment of Fe, Cr and Ni cations selectively leached from 316L stainless steel”, presented in International Union of Materials Research Societies-International Conference in Asia (IUMRS-ICA 2011), Taipei, Taiwan.,
2011 S.H. Chang, S.K. Wu, 2011.11, “Characteristics of TiNi shape memory foils manufactured by double cathodes electrochemical polishing”, presented in International Conference on Shape Memory and Superelastic Technologies (SMST 2011), Hong Kong, China.,
2010 張世航,李祈穎,江金河,林秉學,黃嘉駿,2010.11,“Ni41.6Mn48.7Ti9.7形狀記憶合金制振能之研究”, 中國材料科學學會2010年年會論文集,高雄。,
2010 張世航,李祈穎,林勇志,柯志穎,林鈞詳,2010.11,“TiNi形狀記憶合金線材/環氧樹脂複合材料制振能之研究”, 中國材料科學學會2010年年會論文集,高雄。,
2010 K.H. Chang, S.K. Wu and S.H. Chang, 2010.11, “Martensitic Transformation of As-spun and Annealed Ti51.9Ni38.5Cu9.5 Ribbons”, Proc. of 2010 Annual Conf. of the Chinese Soc. for Materials Science, Kaohsiung.,
2010 張世航,林克駿,吳錫侃,王建義,薄慧雲,2010.11, ”低頻下LAZ1110鎂鋰合金制振能及其高制振能背景值之研究”, 99年國防科技學術研討會論文集,桃園。,
2010 S.H. Chang, S.K. Wu, T.H. Chen, 2010.7, “Influence of nano-sized precipitates on the internal friction of as-spun and annealed Ti51Ni49 ribbons”, presented in the 5th International Conference on Technological Advances of Thin Films & Surface Coatings (Thinfilms 2010), Harbin, China.,
2010 K.H. Chang, S.K. Wu, S.H. Chang, 2010.7, “Crystallization temperature and activation energy of as-spun Ti52.0Ni38.5Cu9.5 ribbon”, presented in the 5th International Conference on Technological Advances of Thin Films & Surface Coatings (Thinfilms 2010), Harbin, China.,
2010 S.H. Chang, J.L. Han, C.Y. Lee, G.L. Liu, 2010.7, “Internal friction of TiNi shape memory alloy wires/epoxy composites measured by dynamic mechanical analysis”, presented in the 1st International Conference on Advanced Polymer Matrix Composites (COMPO 2010), Harbin, China.,
2010 J.L. Han, G.L. Liu, S.H. Chang, 2010.7, “Thermal and Dynamic Mechanical Properties of Polyurethane-Modified Epoxy Based Sugarcane Fiber Composites”, presented in the 1st International Conference on Advanced Polymer Matrix Composites (COMPO 2010), Harbin, China.,
2010 S.H. Chang, K.C. Lin, S.K. Wu, J.Y. Wang, H.Y. Bor, 2010.11, ”Low-frequency Damping Properties and High-temperature Damping Background of LAZ1110 Magnesium Alloy”, presented in the 5th Yellow-Sea-Rims (YSR-5) Magnesium Alloys Int’l Conference, Taipei, Taiwan.,
2009 S.H. Chang, S.K. Wu, W.L. Tsai and T.H. Chen, 2009. 6, “Cold-rolling effect on damping characteristics for AZ80 magnesium alloy at high-temperature damping background temperature region”, presented in 2009 Annual Taiwan Magnesium Conference, Taipei.,
2009 S.H. Chang, S.K. Wu, W.L. Tsai and J.Y. Wang, 2009. 11, “Cold-rolling effect on damping capacity of high-temperature damping background for AZ80 magnesium alloy”, presented in 2009 Annual Conf. of the Chinese Soc. for Materials Science, Hualien.,
2009 陳廷翰,吳錫侃,李祈穎,林孟儒,張世航,2009.11, “Cu-13.5Al-4Ni形狀記憶合金持溫制振能之研究”, 中國材料科學學會2009年年會論文集,花蓮。,
2009 陳廷翰,吳錫侃,李祈穎,張世宗,張世航,2009.11, “不同Cu/Al組成比例之Cu-Al-Ni形狀記憶合金制振能之研究”, 中國材料科學學會2009年年會論文集,花蓮。,
2009 S.H. Chang, S.K. Wu, T.H. Chen and L.M. Wu, 2009. 11, “Martensitic transformation and damping capacity of Ti51Ni49 melt-spun ribbons measured by dynamic mechanical analysis”, presented in 2009 Annual Conf. of the Chinese Soc. for Materials Science, Hualien.,
2009 S.H. Chang, T.H. Chen, S.K. Wu, K.N. Lin, 2009.6, “Damping characteristics of Ti-rich TiNi melt-spun ribbon measured by dynamic mechanical analyzer”, presented in the 3rd International Symp. on Functional Materials (ISFM 2009), Jinju, Korea.,
2009 K.N. Lin, S.K. Wu, S.H. Chang, 2009.6, “Study on Ti50Ni25-XPd25-YCuX+Y high temperature shape memory alloys”, presented in the 3rd International Symp. on Functional Materials (ISFM 2009), Jinju, Korea.,
2008 S.H. Chang, S.K. Wu and T.H. Chen, 2008.11, “Cold-rolling effect on internal friction for AZ31 magnesium alloy”, presented in 2008 Annual Conf. of the Chinese Soc. for Materials Science, Taipei.,
2008 S.H. Chang, S.K. Wu and T.H. Chen, 2008.11, “Internal friction of Ni-Mn-Ga ferromagnetic shape memory alloys under isothermal conditions”, presented in 2008 Annual Conf. of the Chinese Soc. for Materials Science, Taipei.,
2008 張世航,陳廷翰,吳錫侃,李祈穎,2008.11, “Ti51Ni49形狀記憶合金薄帶制振能性質之研究”, 中國材料科學學會2008年年會論文集,台北。,
2008 S.H. Chang, S.K. Wu, K.N. Lin, 2008.6, “Low frequency damping properties of Ni-Mn-Ga shape memory alloys”, presented in International Conference on Martensitic Transformation (ICOMAT 2008), Santa Fe, New Mexico, USA.,
2008 K.N. Lin, S.K. Wu, S.H. Chang, 2008.6, “Annealing effect on transformation behavior of Ni-rich Ti49Ni41Cu10 shape memory alloy”, presented in International Conference on Martensitic Transformation (ICOMAT 2008), Santa Fe, New Mexico, USA.,
2007 S.H. Chang and S.K. Wu, 2007.11, “Cooling rate effect on the measurement of martensitic transformation temperatures of equiatomic TiNi shape memory alloy”, presented in 2007 Annual Conf. of the Chinese Soc. for Materials Science, Hsinchu.,
2007 S.H. Chang and S.K. Wu, 2007.11, “Damping characteristics of Ti51Ni39Cu10 ternary alloy measured by dynamic mechanical analyzer”, presented in 2007 Annual Conf. of the Chinese Soc. for Materials Science, Hsinchu.,
2007 S.H. Chang and S.K. Wu, 2007.11, “Isothermal effect on internal friction of equiatomic TiNi alloy measured by dynamic mechanical analyzer with step cooling method”, presented in 2007 Annual Conf. of the Chinese Soc. for Materials Science, Hsinchu.,
2007 S.H. Chang, S.K. Wu, K.N. Lin, 2007.5, “Shape memory effect of Ti50Ni25Cu25 melt-spun ribbons crystallized under isothermal annealing”, presented in the 2nd International Symp. on Functional Materials (ISFM 2007), Hangchou, China.,
2007 K.N. Lin, S.K. Wu, S.H. Chang, 2007.5, “Grain-size effect on multiple-stage martensitic transformation of cold-rolled and annealed Ti51Ni40Cu9 shape memory alloy”, presented in the 2nd International Symp. on Functional Materials (ISFM 2007), Hangchou, China.,
2007 S.H. Chang, S.K. Wu, J.Y. Wang, 2007.10, “Damping characteristics of severely cold-rolled and annealed AZ31 alloy”, presented in the 2nd Asian Symp. on Magnesium Alloys (ASMA-II), Fukuoka, Japan.,
2006 S.H. Chang and S.K. Wu, 2006.11, “Inherent internal friction of B2→B19’ martensitic transformation in equiatomic TiNi shape memory alloy”, presented in 2006 Annual Conf. of the Chinese Soc. for Materials Science, Tainan.,
2006 S.H. Chang and S.K. Wu, 2006.11, “The study on crystallization kinetics of amorphous Ti50Ni25Cu25 melt-spun ribbons by using Johnson-Mehl-Avrami equation”, presented in 2006 Annual Conf. of the Chinese Soc. for Materials Science, Tainan.,
2006 机紹瑋,吳錫侃,張世航,2006.11,“Ti50Ni50-XPdX高溫形狀記憶合金Cu取代Pd之研究”,中國材料科學學會2006年年會論文集,台南。,
2006 周鼎堯,吳錫侃,張世航,童山,2006.11,“鎂鋰合金制振能之研究”,中國材料科學學會2006年年會論文集,台南。,
2005 S.H. Chang and S.K. Wu, 2005.11, “Annealing effect on shape memory characteristics of Ti50Ni25Cu25 melt-spun ribbons”, presented in 2005 Annual Conf. of the Chinese Soc. for Materials Science, Tamshui, Taipei.,
2005 S.H. Chang and S.K. Wu, 2005.11, “Damping study of cold-rolled and annealed Ti50Ni50 shape memory alloy”, presented in 2005 Anneal Conf. of the Chinese Soc. for Materials Science, Tamshui, Taipei.,
2005 謝人杰,吳錫侃,張世航,王建義,2005.11,“鈦鎳銅形狀記憶合金低頻制振能之研究”,中國材料科學學會2005年年會論文集,淡水,台北。,
2005 S.H. Chang, S.K. Wu, G.H. Chang, 2005.6, “Transformation sequence in severely cold-rolled and annealed Ti50Ni50 alloy”, presented in International Conference on Martensitic Transformation (ICOMAT 2005), Shanghai, China.,
2005 S.H. Chang, S.K. Wu, 2005.9, “Damping characteristics of cold-rolled and annealed equiatomic TiNi shape memory alloy”, presented in the 2nd International Symposium on High Damping Materials 2005 (HDM-2, 2005), Kyoto, Japan.,
2004 G.H. Chang, S.K. Wu and S.H. Chang, 2004.12, “Transformation Behavior of Cold-Rolled and Annealed Ti50Ni50 Shape Memory Alloy” Proc. of 2004 Annual Conf. of the Chinese Soc. for Materials Sci., Hsinchu.,
2003 張世航,吳錫侃,2003. 11,”冷軋延對Ti50Ni50形狀記憶合金性能改進之研究”,中國材料科學學會2003年年會論文集,台南。,
學校名稱 系所 學位
國立臺灣大學 化學系 學士 1995-1999
國立臺灣大學 材料科學與工程研究所 碩士 2001-2003
國立臺灣大學 材料科學與工程研究所 博士 2003-2007
服務機關名稱 單位 職務
國立宜蘭大學 研發處 組長 2009-迄今